Its complete beneficiation production line process includes crushing, grinding, classification, flotation, magnetic separation, concentration, drying and other processes, each process needs to use different beneficiation equipment, jaw crusher, cone crusher is the primary crushing and secondary crushing operation in the beneficiation process commonly used beneficiation equipment, the important role it plays is self-evident, In this Enhong machinery mineral processing production line equipment experts remind customers in the use of cone crusher need to pay attention to the following five matters:
1, cone crusher in operation, feed particle size must be uniform. Because the feed particle size is not uniform, the yield will be reduced and the particle size of the discharge is too large; In addition, the spring action is frequent, the pressure of the bowl bearing increases, and the power consumption increases.
2, cone crusher empty load operation 1-2 minutes to begin to feed the ore. Because the rotary crusher is packed with feed ore, it is necessary to pay attention to whether the feed ore is normal, especially the ore with much mud and high moisture, to prevent the ore from blocking the feed port. Pay attention to check the discharge situation during operation, and do not allow ore accumulation in the space below the sealing device.
3, the transmission belt of the cone crusher can not be installed too tight, otherwise it will cause the drive shaft to rotate inflexible or break, in addition, the distance between the transmission belt and the motor can also be too close, otherwise it has no strength to turn.
4, cone crusher feed particle size can not be too wet, or viscosity is too large, otherwise it will cause stuffy car. If there is a blockage, the motor will burn out.
5, the spring of the cone crusher can not be pressed too tightly, because the pressure is too large, it will lead to broken shaft. On the contrary, if the pressure is small, frequent beating will occur, affecting the production of the crusher.
