The production capacity of the jaw crusher is affected by many factors such as the nature of the ore (such as hardness, particle size), the type of the crusher, the size and the operation mode of the crusher (such as whether the material is evenly put), resulting in the production capacity of the jaw crusher in the production process can not meet the user's production requirements. To further improve product quality, enhance the competitiveness of the market, today Enhong machinery for this problem, for you to put forward several scientific and feasible optimization methods to improve the production capacity of jaw crusher.
Methods to improve the production capacity of jaw crusher
1, should be evenly fed, strictly control the amount of feeding.
When feeding, it should be added according to the actual production situation of the user, the feeding must be kept uniform, and do not let the particle size is too large, hard materials, materials with more water content or iron blocks and other non-broken things into the crushing chamber. These are the factors that affect the production capacity of jaw crusher.
2. The size of the discharge port should be adjusted in time
In the crushing production, the size of the discharge port is adjusted in time according to the nature of the feed (the adjustment range is generally 10mm-300mm), which can not only improve the production capacity, but also prevent the machine from clogging and improve the machine's working speed.
3, should choose good wear resistance crushing equipment accessories
The better the wear resistance of the crushing parts of the crushing equipment (hammer head, jaw plate), the greater the crushing capacity, if not wear-resistant, will affect the crushing capacity of the jaw crusher.
4, should choose the equipment, put the material, reduce the equipment card material
The card material will seriously reduce the production capacity of the jaw crusher, the nature of different materials (hardness, humidity, viscosity of the material) the use of improper equipment models, improper parameters of the machine, the size of the discharge port is unreasonable, and too much feed will make the equipment card material. Therefore, in the crushing production, the phenomenon of equipment sticking should be reduced and the productivity of the jaw crusher should be improved.
