Wet mill

　　Wet mill mainly through the raw material stirring, rolling, crushing, rolling repeatedly to achieve water balance, uniform ratio, low gas content, improve the molding rate and molding quality, through the machine grinding material molding products, with high density, good strength, no porosity ratio and other characteristics. The product is used to recover the tailings in the iron ore process, so as not to lose the ore powder, so that the effective resources can be fully utilized.

　　1, bearing the full load of the machine, so good lubrication has a great relationship to the bearing life, it directly affects the service life and operating rate of the machine, so the injection of lubricating oil needs to be clean, seal needs to be good, the main oil of the machine: rotating bearings, roll bearings, all gears, active bearings, sliding plane.

　　2, the newly installed tires are easy to loose and need to be checked frequently.

　　3, pay attention to the work of each part of the machine is normal.

　　4. Pay attention to check the wear degree of easily worn parts, and pay attention to replacing worn parts at any time.

　　5, put the chassis plane of the mobile device, should be out of the dust and other things to avoid the machine encounter can not be broken when the movable bearing can not move on the chassis, resulting in serious accidents.

　　6, bearing oil temperature rise, should immediately stop to check the cause to be eliminated.

　　7. If there is impact sound when the rotating gear is running, it should be stopped immediately for inspection and eliminated.

　　The power of the wet roller is that the motor is driven by the triangular belt to the gearbox, and then the gearbox drives the roller, so that the roller runs in a clockwise direction. The raw materials in the basin run with the roller, with the rotation of the roller, so as to achieve the purpose of uniform mixing. At the same time, with the roller and the friction of the roller plate, the raw material is stirred - crushed - crushed - rolled repeatedly to achieve a certain fineness and then discharged with water to achieve the purpose of mineral processing.

Wait until updated