Gold mill

　　Gold mill is also called wet mill, wheel mill. It is mainly used for crushing equipment after the material is broken. It is widely used in cement, silicate products, new building materials, refractories, fertilizers, black non-ferrous metal mineral processing and glass ceramics and other production industries, for a variety of ores and other grindable materials dry or wet grinding. All the ore that can be selected by the ball mill can be used by the gold mill. And the gold mill is easy to install and maintain, small investment, high output, quick effect, low production costs, is the ideal equipment for small and medium-sized enterprises in mining areas

　　1. After the frame is installed horizontally and smoothly, put the birdbath on the frame, correct the center position, and then lock the four fixing screws under the birdbath on the frame.

　　2, put 3-5CM sand evenly in the basin, and then put the grinding bottom on the sand, and adjust the center in four directions.

　　3. Put the roller into the center of the track and connect the connecting rod with the roller.

　　4, the machine gearbox and bearing parts need to be refueled as required.

　　5, power on the size of the mill must be installed starter.

　　6, empty machine test start, adjust the left and right clearance between the roller and the roller groove, with the roller equal distance from both sides of the roller.

　　7. Turn the machine empty for 15 minutes to check whether the screws in each part are loose.

　　8. Fill the gap between the grinding bottom and the water pan with cement concrete, and make it into a bevel, so that the ore can enter the middle of the grinding tank smoothly and break the ore quickly.

　　9. After the solidification period of cement mortar in the basin, you can start the machine, add water and add ore to start production.

The equipment is mainly composed of power device, frame, water basin, roller, roller and other components, using wheel grinding mode: The ideal motor drives the power to the reducer, and under the drive of the reducer, the torque is transmitted to the upper horizontal shaft through the vertical shaft, and then transmitted to the roller wheel through the pull rod installed at both ends of the horizontal shaft, so that the roller wheel generates driving force and rotates counterclockwise along the horizontal direction of the horizontal shaft; When working, the roller can not only revolve around the large vertical shaft of the wet roller, but also rotate around the central axis of the roller wheel, and the roller plate is fixed. The added ore material is subjected to extrusion pressure brought by the weight of the roller itself in the mill, and the huge friction generated by the roller rotation and the roller plate is completely crushed after repeated extrusion, kneading and grinding