As the name suggests, the non-clogging crusher is a crusher with high working efficiency and low failure rate. It uses pure collision principle to break materials. The specially designed crushing gear plate, crushing chamber and rotary hammer kinetic energy design achieve a better match. The materials bounce back and forth in the crushing chamber, and collide with each other during the bouncing process, and are crushed step by step, and the materials after reaching the design particle size are discharged from the bottom opening of the crusher. The adjustment of the discharge particle size is accomplished by adjusting the gap between the tooth plate and the rotary hammer. The crusher has the following characteristics:
(1) Uniform discharge particle size, large output, low energy consumption.
(2) Adapt to the fine fragmentation of brittle materials with large water content, no blocking, less dust and low noise.
(3) Shorten the retention time of the material in the crushing chamber and improve the life of the wearing parts.
(4) The two-way rotation of the crusher, through the continuous two-way rotation operation mode of such shifts, the hammer head and the crushing tooth plate can be evenly worn, reducing the frequency of stopping and replacing the wearing parts.
(5) Easy installation, the symmetrical design of the crusher, can be arranged according to user needs, greatly improving the freedom of equipment installation.
(6) The maintenance is rapid, the side doors on both sides of the crusher can be opened, so that the replacement of wearing parts is faster and the downtime is shortened.
